{"product_id":"raspberry-pi-poe-hat-compatible-with-raspberry-pi-4b-3b-df-dfr0876","title":"Raspberry Pi PoE+ HAT (Compatible with Raspberry Pi 4B \/ 3B+)","description":"\u003cp\u003eThe Raspberry Pi PoE+ HAT, a compatible expansion board for Raspberry Pi 3B+\/4B, is designed to enhance your Raspberry Pi by adding PoE+ capabilities to its Ethernet port. It stands out with its superior heat dissipation and increased power capacity. \u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSupport for 802.3af PoE Network Standard \u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis allows a Raspberry Pi to be powered and connected to the network using a single Ethernet cable, simplifying the setup process and reducing cable clutter.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFully Isolated Switch Mode Power Supply (SMPS) \u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eEquipped with a fully isolated Switch Mode Power Supply (SMPS), the Raspberry Pi PoE+ HAT ensures a stable and efficient power supply. This protects the device from potential damage caused by power surges and fluctuations.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003e37-57V DC Input and 5V\/5A DC Output \u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eWith a 37-57V DC input and a 5V\/5A DC output, the Raspberry Pi PoE+ HAT provides sufficient power to handle a Raspberry Pi 3B+\/4B under maximum load. This ensures that power-intensive applications can run without any power shortages.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003e25mm x 25mm Brushless Cooling Fan \u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis helps to maintain an optimal temperature for the Raspberry Pi, ensuring optimal performance and longevity of the device.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHardware Connection Steps\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003eBefore installing the PoE HAT, first install the provided standoffs at the four corners of the circuit board.\u003c\/li\u003e\u003cli\u003eAlign the PoE HAT with the 40-pin and 4-pin PoE interfaces of the Raspberry Pi and connect them.\u003c\/li\u003e\u003cli\u003eAfter connecting the PoE HAT board, you can power and connect to the network through an Ethernet cable connected to a PoE device.\u003c\/li\u003e\u003cli\u003eWhen removing the PoE HAT, pull evenly to make the module smoothly detach from the Raspberry Pi pin header, avoiding bending the pins.\u003c\/li\u003e\u003cp style=\"text-align: center; \"\u003e\u003cimg src=\"https:\/\/image.dfrobot.com\/image\/cache3\/data\/DFR0876\/1.jpg\" alt=\"Install PoE+ HAT and Raspberry Pi 4B\" title=\"Install PoE+ HAT and Raspberry Pi 4B\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePrecautions\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003eOnly PoE devices that comply with the 802.3af standard can be used for power supply.\u003c\/li\u003e\u003cli\u003eThe external power supply used by Raspberry Pi should comply with the relevant regulations and standards applicable to the intended use.\u003c\/li\u003e\u003cli\u003eIt should be operated in a well-ventilated environment and should not be used in an enclosed manner.\u003c\/li\u003e\u003cli\u003eDuring use, it should be placed on a stable, flat, non-conductive surface and should not come into contact with conductive items.\u003c\/li\u003e\u003cli\u003eDo not block or obstruct the fan, and do not insert anything into the fan.\u003c\/li\u003e\u003cli\u003eDo not expose this product to water, humid environments, or high-temperature environments. This product is designed to operate under normal room temperatures.\u003c\/li\u003e\u003cli\u003eCare must be taken during use to avoid mechanical or electrical damage to the printed circuit board and connectors.\u003c\/li\u003e\u003ch2\u003eSpecification:\u003c\/h2\u003e\u003cli\u003eModel: IEEE 802.3at-2003 PoE\u003c\/li\u003e\u003cli\u003eInput Voltage: 37-57V DC\u003c\/li\u003e\u003cli\u003eOutput Power: 5V\/5A DC output\u003c\/li\u003e\u003cli\u003eOperating Temperature: 0~50\u003c\/li\u003e\u003ch2\u003eDocuments:\u003c\/h2\u003e\u003cli\u003e\u003ca href=\"link\" target=\"_blank\" previewlistener=\"true\"\u003eProduct Brief\u003c\/a\u003e\u003c\/li\u003e\u003ch2\u003eProduct Includes:\u003c\/h2\u003e\u003cli\u003eRaspberry Pi PoE+ HAT × 1\u003c\/li\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":41132228280402,"sku":"DF-DFR0876","price":63.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0735\/0383\/files\/DFR0876.jpg?v=1722760597","url":"https:\/\/www.pakronics.co.nz\/products\/raspberry-pi-poe-hat-compatible-with-raspberry-pi-4b-3b-df-dfr0876","provider":"Pakronics®","version":"1.0","type":"link"}