FireBeetle 2 ESP32-C5-U (N4) IoT Development Board (Dual-Band Wi-Fi 6, External Antenna)

SKU: DF-DFR1287
Sale price $21.00 NZD
77 units ships in 7 to 10 days

This FireBeetle 2 ESP32-C5-U(N4) development board is a compact low-power IoT platform based on the Espressif ESP32-C5-WROOM-1U-N4 module. Combining a 240 MHz single-core RISC-V processor, 4 MB Flash, dual-band Wi-Fi 6, Thread 1.3, Zigbee 3.0 and flexible power management, this ESP32-C5 development board is designed for smart home, industrial IoT, wireless sensing and battery-powered edge device projects.


2.4 GHz + 5 GHz Dual-Band Wi-Fi 6 for More Flexible Wireless Deployment

This ESP32-C5 development board supports both 2.4 GHz and 5 GHz Wi-Fi bands with IEEE 802.11a/b/g/n/ac/ax compatibility. The 5 GHz band provides an additional option for applications that benefit from higher throughput, lower latency and reduced interference compared with crowded 2.4 GHz environments. Wi-Fi 6 features such as OFDMA and Target Wake Time also help improve network efficiency and support lower-power connected applications.


U.FL External Antenna Connector for Enclosed IoT Devices

This FireBeetle development board uses a U.FL (IPEX) external antenna connector, allowing the antenna to be positioned outside metal enclosures, electrical cabinets or waterproof housings where radio signals may otherwise be attenuated. The connector supports external 2.4 GHz / 5 GHz dual-band antennas for flexible antenna selection and mounting. The package includes a 2.4GHz communication FPC antenna.


Thread 1.3, Zigbee 3.0 and Matter-Oriented Smart Home Development

This wireless IoT development board supports Wi-Fi, 2.4 GHz low-power wireless communication and IEEE 802.15.4, including Thread 1.3 and Zigbee 3.0. This protocol combination supports development of Matter over Wi-Fi or Thread end devices for cross-platform smart home projects. When paired with an external MCU, this ESP32-C5 platform can also be used in Thread Border Router, Matter Gateway or Zigbee Bridge development scenarios.


Solar Charging, Battery Monitoring and 21 μA Deep Sleep

This low-power IoT development board supports USB Type-C power, 5 V DC input and 4.5–6 V solar panel input for Li-ion battery charging. The power management design uses the same solar power management IC as the DFRobot 5 V@1 A Solar Power Manager and supports battery voltage monitoring. A switchable 3.3 V output can disconnect external sensors when inactive, while the 21 μA deep-sleep current under battery power helps reduce standby energy consumption in long-term wireless monitoring applications.


Compact Expansion Platform for Sensors, Displays and Wireless Nodes

This ESP32-C5 board measures 25.4 × 60 mm and provides 18 digital I/O, SPI, UART, I2C, I2S, ADC, PWM and infrared transceiver resources, together with an onboard GDI connector and PH2.0 Li-ion battery connector. Support for C/C++ and MicroPython makes this platform suitable for indoor air quality monitoring, balcony plant monitoring, smart home IoT, wireless sensor nodes, Matter devices, Zigbee gateway development and Home Assistant projects.

Features:

  • Based on the ESP32-C5-WROOM-1U-N4 module
  • Up to 240 MHz single-core RISC-V processor
  • 384 KB SRAM, 320 KB ROM, 4 MB Flash and 16 KB LP SRAM
  • Supports 2.4 GHz & 5 GHz dual-band Wi-Fi 6
  • Supports 2.4 GHz low-power wireless communication, Thread 1.3 and Zigbee 3.0
  • U.FL (IPEX) external antenna connector for flexible antenna placement outside metal or waterproof enclosures
  • Supports USB Type-C, 5 V DC and 4.5–6 V solar panel power input
  • Supports Li-ion battery charging with a maximum charging current of 0.5 A
  • Battery voltage monitoring and switchable 3.3 V power output
  • 21 μA deep-sleep current under battery power
  • Onboard GDI connector for display integration
  • Onboard PH2.0 Li-ion battery connector
  • Supports C/C++ and MicroPython development
  • Applications:

  • Indoor air quality monitoring
  • Balcony plant monitoring
  • Smart home IoT
  • Wireless IoT nodes
  • Matter smart home devices
  • Zigbee gateways
  • Home Assistant projects
  • Specification:

    General

  • Operating Voltage: 3.3 V
  • USB Type-C Input: 5 V DC
  • VIN Input: 5 V DC or 4.5–6 V Solar Panel
  • Maximum Charging Current: 0.5 A
  • Deep-sleep Current: 21 μA (battery powered)
  • Board Dimensions: 25.4 × 60 mm
  • Hardware

  • Processor: Single-core RISC-V
  • CPU Frequency: 240 MHz
  • SRAM: 384 KB
  • ROM: 320 KB
  • Flash: 4 MB
  • LP SRAM: 16 KB
  • Wi-Fi

  • Frequency Bands: 2.4 GHz & 5 GHz (1T1R)
  • Standards: IEEE 802.11a/b/g/n/ac/ax
         IEEE 802.11a/b/g/n (up to 150 Mbps)
         IEEE 802.11ax (20 MHz-only non-AP mode)
  • Wi-Fi Modes: Station, SoftAP, SoftAP + Station, Promiscuous Mode
  • 2.4GHz low-power wireless communication

  • Data Rates: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
  • IEEE 802.15.4

  • IEEE 802.15.4-2015 compliant
  • Frequency Band: 2.4 GHz
  • Data Rate: 250 Kbps
  • Supports Thread 1.3 and Zigbee 3.0
  • Interfaces

  • Digital I/O: 18
  • LED PWM Controller: 6-channel
  • SPI: 1
  • UART: 3 (including 1 × LP UART)
  • I2C: 2 (including 1 × LP I2C)
  • I2S: 1
  • Infrared Transceiver: 5 × TX Channels, 5 × RX Channels
  • 12-bit SAR ADC: 1 (7 Channels)
  • DMA Controller: 3 RX Channels + 3 TX Channels
  • Documents:

  • Product Wiki
  • Product Includes:

  • FireBeetle 2 ESP32-C5-U(N4) Development Board x1
  • 2.4GHz communication FPC antenna x1
  • 20-pin 2.54 mm Male Header x2
  • Shipping rates Australia wide and New Zealand

    Please add the items in cart and proceed to checkout to calculate shipping cost. We have range of shipping options once goods are ready to dispatch. 
    1. Regular shipping: Goods will be shipped using Australia post regular shipping service. 
    2. Express shipping: Goods will be shipped using Australia post EXPRESS shipping service. 
    3. Express split shipping: Local stock from Melbourne will be shipped ASAP (1 business day) using EXPRESS shipment while remaining items from overseas stock when arrived in Melbourne shipped using second EXPRESS shipment. 
    4. Pick up from Thomastown, Melbourne is available on appointment between 9 am to 3 pm during business days. 

      

    FAQ:

    • How do I estimate shipping for my order?
      • Add products in the shopping cart and head to the checkout page to estimate the shipping.

    Dispatch time

    Unless expressly agreed otherwise with you, we will not commence delivery of an order until we have received cleared payment of the purchase price in full.

    All orders placed before 11 am AEST (Monday to Friday) will ordinarily be processed on the same day.

    We will endeavour to ship the Products by the applicable time indicated on the website, but all times are indicative only.  All shipping times are dispatch times only, and actual delivery dates will depend on the shipping method chosen, delivery address and delivery service provider. 

    Note- Please make a note during purchase if you require any item urgently. However we cannot guarantee that we will be able to comply with any request. 

    *Go to Australia post delivery time calculation to get various Australia post service in your area please use our shipping postcode Thomastown, 3074 as the "from" address - https://auspost.com.au/parcels-mail/delivery-times.html?ilink=tools-open-deliv-times.

    Shipping Destinations

    We ship all products throughout mainland Australia, Tasmania and New Zealand - Including Darwin, Melbourne, Sydney, Tasmania, Adelaide, Brisbane, Perth, all metro and regional areas but do not deliver to areas in Australia where the Australia Post delivery network is not available. 

    Check Express shipping delivery coverage area at - http://auspost.com.au/parcels-mail/delivery-areas.html

    Receipt of deliveries

    Deliveries to post office boxes are not permitted where delivery is by courier. If delivery is by courier and nobody is available at the delivery address to accept delivery when delivery is attempted then the courier may either:

    • leave the relevant parcel at the unattended address (the courier will do so if specified in your delivery requirements); or
    • re-attempt delivery at a later time or date, in which case we may charge you an additional re-delivery fee. 

    Note that if a delivery is left unattended at the shipping address and is subsequently stolen then the theft is your responsibility, not ours.

    Payment & Security

    Apple Pay Google Pay Mastercard PayPal Visa

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    You may also like