Products

Save 5%

In Stock

2.4GHz Dipole Swivel Antenna with RP-SMA - 2dBi

$19.00 NZD $20.00 NZD

2.4GHz Dipole Swivel Antenna with RP-SMA - 5dBi

$20.00 NZD

2.4GHz FPC Antenna (1.16dBi) for XIAO ESP32-S3

$4.00 NZD

2.4GHz FPC Antenna (1.86dBi) for XIAO nRF54L15

$4.00 NZD

2.4GHz FPC Antenna (2.9dBi) for Seeed Studio XIAO ESP32-C3

$4.00 NZD

In Stock

2.4GHz low power consumption BLE4.0 module (not include antenna) 16*16mm

$27.00 NZD

In Stock

2.4GHz Mini Flexible WiFi Antenna with uFL Connector 2

$8.00 NZD

2.4GHz Whip Rubber Antenna

$13.00 NZD

2.4Ghz Wireless Serial module extension for mBot

$38.00 NZD

2.5" SATA III to USB 3.0 Adapter Cable - 30cm long

$33.00 NZD

2.5mm (3/32") 4-Pole (TRRS) Audio Jack Terminal Block

$10.00 NZD

2.5mm (3/32") 4-Pole (TRRS) Audio Plug Terminal Block

$9.00 NZD

2.5W Solar Panel 116X160

$23.00 NZD

$2.66\" 296x152 Monochrome or Gray eInk / ePaper - Bare Display$ $2.66\" 296x152 Monochrome or Gray eInk / ePaper - Bare Display$

2.66\" 296x152 Monochrome or Gray eInk / ePaper - Bare Display

$29.00 NZD

$2.66\" 296x152 Tri-Color Red / Black / White EInk - Bare Display$ $2.66\" 296x152 Tri-Color Red / Black / White EInk - Bare Display$

2.66\" 296x152 Tri-Color Red / Black / White EInk - Bare Display

$29.00 NZD

Save 4%

In Stock

2.7'' e-Paper Panel

$55.00 NZD $57.00 NZD

2.7'' Triple-Color E-Ink Display for Raspberry Pi

$65.00 NZD

2.8 320x240 IPS TFT LCD Resistive Touchscreen with MicroSD Card Slot

$48.00 NZD

$2.8\" TFT Display with Resistive Touchscreen$ $2.8\" TFT Display with Resistive Touchscreen$

2.8\" TFT Display with Resistive Touchscreen

$39.00 NZD

$2.8\" TFT LCD with Cap Touch Breakout Board w/MicroSD Socket$ $2.8\" TFT LCD with Cap Touch Breakout Board w/MicroSD Socket$

2.8\" TFT LCD with Cap Touch Breakout Board w/MicroSD Socket

$66.00 NZD

$2.8\" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket$ $2.8\" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket$

2.8\" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket

$66.00 NZD

$2.8\" TFT Touch Shield for Arduino w/Capacitive Touch$ $2.8\" TFT Touch Shield for Arduino w/Capacitive Touch$

2.8\" TFT Touch Shield for Arduino w/Capacitive Touch 1

$98.00 NZD

$2.8\" TFT Touch Shield for Arduino with Resistive Touch Screen$ $2.8\" TFT Touch Shield for Arduino with Resistive Touch Screen$

2.8\" TFT Touch Shield for Arduino with Resistive Touch Screen 1

$55.00 NZD

$2.9\" Monochrome ePaper Display with 296x128 Pixels, SPI interface, Support XIAO/Arduino/STM32$

2.9" Monochrome ePaper Display with 296x128 Pixels

$21.00 NZD

2.9" Quadruple Color ePaper Display with 128x296 Pixels

$21.00 NZD

$2.9\" Flexible 296x128 Monochrome eInk / ePaper Display$ $2.9\" Flexible 296x128 Monochrome eInk / ePaper Display$

2.9\" Flexible 296x128 Monochrome eInk / ePaper Display

$55.00 NZD

$2.9\" Flexible Monochrome eInk / ePaper Display with 296x128 Pixels, SPI interface, Support XIAO/Arduino/STM32$ $2.9\" Flexible Monochrome eInk / ePaper Display with 296x128 Pixels, SPI interface, Support XIAO/Arduino/STM32$

2.9\" Flexible Monochrome eInk / ePaper Display with 296x128 Pixels, SPI interface, Support XIAO/Arduino/STM32

$29.00 NZD

20 in 1!Basic components mixed pack

$14.00 NZD

2021 MakeX Starter Smart Links Add-on Pack

$380.00 NZD

2021 MakeX Starter Smart Links Kit

$487.00 NZD

2021 MakeX Starter Smart Links Upgrade Pack for City Guardian

$130.00 NZD

In Stock

2032 Coin cell battery holder with switch & screw

$5.00 NZD

20cm PH2.0-3P Male-to-Male Cable for Boson & UNIHIKER (10-Pack)

$14.00 NZD

20cm PH2.0-4P Male-to-Male Cable for Boson & UNIHIKER (10-Pack)

$18.00 NZD

In Stock

20mm Coin Cell Breakout Board (CR2032)

$8.00 NZD

In Stock

20mm Coin Cell Breakout w/On-Off Switch (CR2032) 1

$10.00 NZD

Recover password

All products